2" Electric Water Temperature Gauge
- 100° - 280° F / 40º - 130º C
- Back-Lit™ illumination for night use
- 90 degree analog needle sweep provides reliable performance on a budget
- Rear twist-on ring mount design makes mounting simple
- Includes 1/8 NPT sensor, 1/2 NPT, 3/8 NPT, and M16x1.5 adapter bushings.
|Analog or Digital:||Analog|
|Gauge Size (in.):||2.063|
|Gauge Depth (in.):||1.63|
|Range:||100 - 280 F|
|Scale:||Deg F, C|
|Electrical or Mechanical:||Electrical|
|Lighting Type:||White Incandescent|
SHIPS WITHIN 2 BUSINESS DAYS
FREE SHIPPING ON ORDERS OVER $99
HASSLE FREE RETURNS
6000 SERIES BENEFITS
EQUUS® DIY GAUGES & TACHS
The 6000 series line includes a wide selection of 1½” and 2” gauges with 90º (electrical) and 270º (mechanical) sweeps, as well as matching tachometers for the do-it-yourselfer.
The series' increased performance and accuracy is achieved by its original equipment-type Electric Aircore meter movement or solid brass mechanical Bourdon Tube meter movement. All feature Back-Lit™ illumination and include easy-to-read mounting instructions in English, French and Spanish.
TWIST ON RING MOUNT
All of our single and triple gauge kits include a rear ring mount attachment to make installation very simple.
What type of wire is recommend for the installation?
We recommend to use 18-20 AWG stranded copper wire.
What would cause my gauge to peg past 280?
A bad ground connection can cause a gauge to peg. We recommend to verify that there is a good clean ground. You can attempt to ground the gauge directly to the negative side of the battery to determine if the ground is faulty. If you use Teflon tape on the sender then you may also require an additional ground from the sender to the chassis.
Can I use a different sender than the one included with the gauge?
Our gauges are designed to work with the sending unit that is included in the packaging. Other sending units may have different specifications and are not guaranteed to work.